Super Fine Grinding Mill
Super Fine Grinding Mill Introduction
HGM series super fine grinding mill is a new type of mill for making super fine powder through more than 20 times of test and improvement. The fineness can reach to 0.038mm; It mainly used for process gypsum, calcspar, talc, and other materials to used in painting, pigment and cosmetics industry.
Compared with jet mill, it costs very economy, high capacity, and the spare parts just need to exchange once a year; the bag filter is added to protect the environment.
Super Fine Grinding Mill Application
The whole system of the Ultrafine grinding mill consists of main unit, deceleration machine, classifier, blower, hammer crusher, dustpan elevator, electro-magnetic vibrating feeder, impulse dust cleaner, piping device, cyclone collector device, classifier, high-pressure motor and muffler.
SCM Series Ultrafine grinding mill is mainly applied to the powder processing of mineral products in industries of metallurgy, construction, chemistry, fertilizer and mining etc. This ultrafine grinding mill can produce powder from non-flammable and non-explosive mineral materials with Moh’s hardness below 9 and humidity below 8%, such as barite, limestone, quartz stone, calcite, granite, porcelain clay, basalt, gypsum etc.
Super Fine Grinding Mill Main Features and Benefits
1. High efficiency.
Under the same condition of finished particle size and power of motor, the SCM Series super thin grinding mill output is 40% higher than airflow mill and whisk mill.
2. Environmental protection.
Pollution and noise are lightened by using deduster and muffler so as to reach the requirement of national environmental protection.
3. High safety.
No axle tree or bolt is used in the grinding chamber, so there will be no worn out problem of bearing and sealing parts, and also no loose of bolts.
4. The Finished size of this Series super thin grinding mill can reach to d97≤5μm.
5. High using rate of spare parts.
Super Fine Grinding Mill Working Principle
The main motor of the grinding mill drives main axle and every layer rotating by the power of reducer. Dial drives numbers of rollers rolling and rotating in the ring by pintles. Big materials are crushed into small particles by hammer crusher. Then they are sent to store house by elevator. Vibrating feeder send the materials evenly to the middle of the upper dial. Under the function of the eccentricity, the materials fall into the ring to be pressed, crushed and milled into pieces by rollers. After the first crush, materials fall into the second and third layer. The pumping of the high-pressure centrifugal blower put the outside air into the machine. The coarse powder will be brought into the classifier.
The rotating turbine in the collector makes the coarse particles fall back for regrinding. The fine particles will come into the cyclone collector with the airflow and discharged by the discharging valve on the bottom of the collector. They are the final products. The airflow with little dust will be discharged through blower and muffler after being purified by the cyclone collector.
Super Fine Grinding Mill Data
| Model | SCM6015 | SCM8021 | SCM10027 |
|---|---|---|---|
| Number of Roller (piece) | 15 | 21 | 27 |
| Ring Diameter (mm) | Φ600 | Φ800 | Φ1000 |
| Number of Ring (piece) | 1×3 | 1×3 | 1×3 |
| Mai n Equipment Rotate Speed (r/min） | 235 | 235 | 173 |
| Max. Inlet Size (mm) | ≤10 | ≤10 | ≤20 |
| Final Size (mesh) | 325~2500 | 325~2500 | 325~2500 |
| Capacity (kg/h) | 325~2500 | 600~4000 | 900~6800 |
| Overall Size (m) | 10×2.3×5.5 | 13×3×5.8 | 18×4×8.6 |
| Name | Item | Unit | Specification and Technical Data | ||
|---|---|---|---|---|---|
| SCM6015 | SCM8021 | SCM10027 | |||
| Motor of Main Machine | Model | Y225s-4 | Y250M-4 | Y315S-4 | |
| Power | KW | 37 | 55 | 110 | |
| Classifier Frequency Modulation Motor | Model | Y160M-4 | Y180M-4 | Y200L1-4 | |
| Power | KW | 11 | 18.5 | 30 | |
| Motor of Elevator | Model | Y100L-4 | Y100L-4 | Y100L-4 | |
| Power | KW | 3 | 3 | 3 | |
| Motor of Blower | Model | Y200L1-2 | Y225M-2 | Y280M-2 | |
| Power | KW | 30 | 45 | 90 | |
| Hammer Crusher | Model | PC250X400 | PC300X400 | PC400X600 | |
| Power | KW | 15 | 15 | 18.5 | |
| Vibrating Feeder | Model | GZ1F | GZ1F | LS180X1050 | |
| Power | KW | 0.06 | 0.06 | 0.2 | |
| Discharge Value | Model | ZJD1:40 | ZJD1:40 | ZJD1:40 | |
| Power | KW | 0.75 | 0.75 | 0.75 | |
| Pulsed Duster | Model | DMC72-Ⅱ | DMC120-Ⅱ | DMC120-Ⅱ | |
